E-Series (TX-E201)
Read before changing batteries!
Before changing batteries, please call the monitoring station and ask them to put your system on test. For this, you will need your account information.
Please note that putting your batteries in backwards may damage the device. Remember to note the battery terminals.
You will need a CR2032 Battery
1.
Depending on the orientation of the sensor, you may have to pull up or down to remove the cover.
2.
Locate the battery.
3.
Gently remove the battery. You may use a small flathead screwdriver if this proves difficult.
4.
Note the battery terminals (+, -). Putting Batteries in Backwards can damage the Device.
5.
Place a new battery in the device (CR2032).
6.
Replace the cover on the device. Press in until you hear a click.
SHARE US WITH YOUR FRIENDS!
Facebook
Twitter
Email
Contact us
- PO Box 574 Magrath, AB, T0K 1J0
- CSS@CanadianSecuritySystems.ca
- Phone: (403) 330-1724
- Toll Free: 1-866-809-5479
- Fax: (403) 758-3956
OPENING HOURS
- Monday - Friday:
-
8:00AM - 5:00PM
- AFTER HOURS EMERGENCY PHONE
- (403) 849-2488
Find us on Social media
Contact us
- PO Box 574 Magrath, AB, T0K 1J0
- CSS@CanadianSecuritySystems.ca
- Phone: (403) 330-1724
- Toll Free: 1-866-809-5479
- Fax: (403) 758-3956
OPENING HOURS
- Monday - Friday:
-
8:00AM - 5:00PM
- AFTER HOURS EMERGENCY PHONE
- (403) 849-2488
Find us on Social media
SUBSCRIBE
Join Our Mailing List For The Latest Updates to Products and Services