Simon XTi-5

Note: You will need a small flathead screwdriver.

1
one

Before changing the battery of your device, please unplug the transformer.

2
two

Find the notches on the bottom corners of the device. Place the screwdriver tip in the notches and pry off the cover.

3
three

Locate the two tabs at the top of the device. Lift both tabs at once to remove the device from the base.

4
four

Locate the battery pack.

5
five

Pinch the end of the wire and remove it from its connection.

6
six

Remove the battery pack.

7
seven

Place a new battery pack in the device (Simon XTi-5 Battery).

8
eight

Connect the battery wires to their connection.

9
nine

Ensuring that the bottom goes in first, replace the device on the base. Press in until you hear a click.

10
ten

Replace the cover on the device. Press in until you hear a click.

After changing the battery, plug the transformer back in and reset the clock on the device.