Simon 3

Note: You will need a small flathead screwdriver.

1
one

Before changing the battery of your device, please unplug the transformer.

2
two

Push in the tab at the top of the device and remove the outer cover.

3
three

Find the tab on the inside of the slot at the top and push it up with the screwdriver.

4
four

Pull apart the cover and the base.

5
five

Locate the battery cover.

6
six

Unscrew the cover and pull out the battery.

7
seven

Remove the wires from the battery terminals.

8
eight

Attach the wires to a new battery (DJW6-1.2), ensuring the red and black wires match up with the terminals of the same colour.

9
nine

Place the battery back in the slot and screw on the cover. Note the hole in the side of the cover for the wires.

10
ten

Replace the cover on the base. Press in until you hear a click.

11
eleven

Replace the outer cover on the base. Press in until you hear a click.

After changing the battery, plug the transformer back in and reset the clock on the device.