Interlogix Recessed Door Contact

Note: You will need a small flathead screwdriver. You do not need to remove the contact from inside your door to change the batteries.

1
one

Insert the screwdriver into the notch on the cover of the device and pry it off.

2
two

Gently remove the circuit board from the device.

3
three

Locate the battery. Note that the battery can only be removed on one side due to the metal that holds it in place.

4
four

Gently remove the battery.

5
five

Note the battery terminals (+, -).

6
six

Place a new battery in the slot (CR2).

7
seven

Note the indents on the inside of the device. Replace the circuit board in the device by sliding it into the indents.

8
eight

Replace the cover on the device. Press in until you hear a click.